8100 Eco-clean+ 5W-30 1L

Motul 8100 Eco-clean+ 5W-30
Gasoline & Diesel oil for Euro 4, 5 and 6 engines
100% Synthetic

TYPE OF USE
High performance 100% synthetic Fuel Economy Engine Oil specially designed for the latest
generation cars, powered by Diesel and Gasoline engines, naturally aspirated or turbocharged,
indirect or direct injection, EURO 4, EURO 5 and EURO 6 emission regulation compliant, requiring an
ACEA C1 engine oil, low friction, low HTHS (< 3.5 mPa.s) viscosity oil and "Low SAPS" with reduced
content of Sulfated Ash (≤ 0.5%), Phosphorus (≤ 0.05%) and Sulfur (≤ 0.2%).
Suitable for any type of Diesel and Gasoline engines calling for "Fuel Economy" lubricants: ACEA C1
standard.
Compatible with catalytic converters and Diesel Particulate Filters (DPF).
May be unsuitable for use in some engines. Always refer to the owner manual or handbook if in doubt.

PERFORMANCES
STANDARDS ACEA C1
JASO DL-1
SPECIFICATIONS FORD WSS M2C 934 B
STJLR.03.5005
RECOMMENDATIONS MAZDA Diesel engines with Diesel Particulate Filter (DPF) expect for
SKYACTIV-D 2.2L from MY2012.
Engines compliant with EURO 4, EURO 5 and EURO 6 emission regulations are fitted with sensitive
exhaust gas after treatment systems. Indeed, Sulfur and Phosphorus inhibit catalytic converters
operation leading to inefficient exhaust gas treatment, and Sulfated Ashes clog DPFs leading to
shorten regenerating cycle, quick oil aging, higher fuel consumption and engine power loss.
JLR - Jaguar and Land Rover, have introduced their own engine oil specifications under the STJLR
banner and the FORD WSS-M2C 934-B specification has now been morphed for Jaguar and Land
Rover into the specification STJLR.03.5005.
The STJLR.03.5005 specification requires high level of oil film resistance, anti-oxidation, anti-wear and
detergent/dispersant properties from the lubricant as well as a significant fuel economy performance: at
least 3.0% Fuel Economy improvement versus a 15W-40 reference oil.
The STJLR.03.5005 specification applies to all JAGUAR and LAND ROVER latest generation of 2.2L
TD4, 3.0L V6 Diesel engines with DPF produced from MY2012 and whenever the specification FORD
WSS-M2C 934-B is required from MY2006.
MAZDA recommendations require to use an approved JASO DL-1 or ACEA C1 lubricant in order to
guarantee Fuel Economy benefits and a perfect durability for most of their recent Diesel with DPF
engines from MY2005. For Mazda SKYACTIV-D 2.2L engines from MY2012 the specification ACEA C3
in viscosity grades 0W-30 or 5W-30 is required, the product MOTUL 8100 X-clean FE 5W-30 is to be
recommended.
ACEA C1 lubricants are environment friendly and reduce fuel consumption, minimizing green
house gases (CO2) emission and also achieve extended drain intervals managed by vehicles
on-board computer.

RECOMENDATIONS
Drain interval: according to manufacturers’ recommendations and tune to your own use.
Do not mix with non ACEA C1 compliant lubricants.
Before use always refer to the owner manual of the vehicle.