8100 X-max 0W-40 1L

Motul 8100 X-max 0W-40
Gasoline and Diesel engine oil
100% Synthetic – Full SAPS

TYPE OF USE
High performance 100% Synthetic lubricant featuring Full SAPS (Sulfated Ash, Phosphorous, Sulfur)
technology, specifically designed for powerful and recent cars fitted with large displacement engines,
Gasoline or Diesel, direct or indirect injection, with or without turbo.
Multipurpose product featuring numerous car maker approvals, especially recommended for vehicles
still under warranty.
Suitable for all type of fuels: Gasoline, Diesel, LPG, CNG and Biofuels.
Compatible for catalytic converters.
If in doubt, before use, refer to the owner manual or handbook of the vehicle.

PERFORMANCES
STANDARDS ACEA A3 / B4
API SERVICE SN
APPROVALS MB-Approval 229.5
PORSCHE A40
VW 502 00 – 505 00
SPECIFICATIONS FORD WSS M2C 937 A
PERFORMANCES BMW Long-Life 01 (For model year up to End of 2018 only)
FIAT 9.55535-Z2
The MERCEDES MB 229.5 standard is more stringent than 229.3 in terms of oil ageing and oil film
resistance (extended drain interval: on-board computer), detergent/dispersant power (ACEA B4) and
requests fuel economy performance: 1.7% fuel economy improvement versus a 15W-40 reference.
The specification MB 229.5 applies to all MERCEDES Gasoline engines, including AMG and except
SLR, and to all MERCEDES Diesel without DPF engines.
The Porsche A40 standard requires extreme high shear resistance from the lubricant. This
specification applies to all PORSCHE engines, except Cayenne V6 and Diesel versions (for these
specific engines, use an approved Porsche C30 lubricant such as MOTUL 8100 X-clean+ 5W-30).
The VW 502 00 and 505 00 standards are specially designed for vehicles of the VAG group
(VOLKSWAGEN, AUDI, SKODA and SEAT) running on fixed oil drain intervals (15,000 km in Europe),
fitted with Diesel engines, without Unit Pump Injector (Volkswagen PD), without Diesel Particulate
Filter (DPF), or Gasoline engines.
The FORD WSS M2C 937 A specification requires an extra high oil film resistance for the lubricant to
guarantee the viscosity capability over the whole oil drain interval even in severe and extreme
conditions (sustained and sport driving,…). This specification applies to all FORD Focus RS 2.5L
Turbo Duratec vehicles from MY2008.
MOTUL 8100 X-max 0W-40 meets the performance of the BMW Long Life-01 standard from the BMW
Group for BMW, MINI and ROLLS-ROYCE vehicles until the model year 2019 i.e. up to End of 2018
only. For models from 2019 onward requiring an approved BMW LL-01 lubricant, products such as
MOTUL 8100 X-cess 5W-30 or MOTUL 8100 X-cess GEN2 5W-40 must be used.
The performance level of FIAT 9.55535-Z2 in 0W-40 requires the lubricant to be both ACEA A3/B4
and 0W-40, in order to lubricate perfectly some very recent gasoline engines from FIAT, ALFAROMEO,
and LANCIA.
MOTUL 8100 X-max 0W-40 meets all these very demanding requirements of performance and
durability set by OEMs, as well as the latest level of international standard API.
The API SN standard requires from the lubricant performance an outstanding detergent/dispersant
power, a better viscosity increase resistance against deposits, and high lubricating properties such
as wear protection and high temperature resistance for better controlled oil consumption and
perfect engine protection over the oil drain interval.
The viscosity grade SAE 0W-40 minimizes oil hydrodynamic friction, allowing fuel economy
especially when oil is cold. Improves oil flow at start up, faster oil pressure build up, faster rev
raisings and faster operating temperature reach.
Environment friendly, this type of oil allows fuel consumption reduction and therefore minimizes
greenhouse gases (CO2) emissions.
Numerous OEMs such as NISSAN, JAGUAR, LAND-ROVER, etc… recommend using a lubricant
with 0W-40 viscosity grade and at least API SM for most of their sporty vehicles like for example
the NISSAN GT-R, 370Z, 350Z,…
MOTUL 8100 X-max 0W-40 formulation is the perfect balance between fuel economy linked to its
viscosity grade and outstanding lubrication performance (high HTHS > 3.5 mPa.s).

RECOMMENDATION
Drain interval: refer to manufacturers’ recommendations and tune to your own use.
MOTUL 8100 X-max 0W-40 can be mixed with synthetic or mineral oils.
Before use always refer to the owner manual or handbook of the vehicle.